(Note that some or all of the newest models no longer have the phone jack, but they still have IP control but with a catch: IP control apparently is, and has been, only available on US models, and that means NOT available in the rest of the world including Canada.) So I have RS-232 working in every day use on a variety of models going back 10 years (including a B6 OLED and a UH610A non-OLED). I've been working with RS-232 control on LG TV's for years now, including newer models with the mini phone jack. I'd rather get the IP connection figured out, but if I can't, I'll convert to RS232 and carry on. If anyone is willing to give me any more hints about the process here, I'd appreciate it. The only way it seems that I can get the port to close when I've opened it via controller command, is to close it via controller command. I can send pretty much any data to whatever port I open on the TV the "fw 1 01" WOL command, power on, power off, etc., and the controller-opened port stays open, but won't respond. I've seen it both ways in examples here, but neither one appears to make any difference. I can send the special "6 x $FF + 16 MacAddr" to any of those opened ports, either immediately after IP_CLIENT_OPEN, or inside a DATA_EVENT - ONLINE event. I can specify IP ports 6, 7, 9, 9760, or 9761 in my controller code, and the TV will come online with an IP_CLIENT_OPEN request on any of those ports. I can't connect to any other port via telnet command. Using terminal commands, I can connect to that port, but it closes as soon as I try to send anything to it. Only port 9761 reports as open on the TV. If the TV you are using does not have this menu then it may not support IP control.Īnyone willing to give me another hint? I can't quite crack it. NOTE: Entering this menu may be tricky and take a few tries. Press 828 then the OK button to bring up the hidden IP Control Setup Menu. Press and hold the Settings button (looks like a gear) on the TVs IR remote until the channel number is displayed on the TV then release the settings button.ĭ. Wait for the TV to display the “snow” no channel static on the screen and all other menus have disappeared.Ĭ. Power the TV ON and set the input to an unused source such as CATV.ī. Instead, a non-magic remote or universal remote with LG TV codes must be used.Ī. Note that the LG Magic Remote can not be used. Use the TV’s IR remote to enter the TVs hidden menu as follows to enable IP control for the TV. The other vendor products that support IP control describe the IP enabling sequence as follows: For those models that do support it, IP control is DISABLED by default. As Eric noted, not all LG TVs support IP control.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |